Bicycle Mechanics - Chain skipping
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
10-19-05, 06:06 PM
I ride a Trek 1200 road bike. When I am grinding up a hill, it feels like the chain slips a few teeth on the rear gear. Everything looks normal. Any advice?
10-19-05, 06:17 PM
you might have worn out gears on your cassette. to inspect them, look at them and see if they're shaped like an ocean wave instead of a half circle. the chain wears down the tips of the gear lobes and your chain will slip over the teeth when you pedal extremely hard. The chainrings on the crank will wear out eventually too.
Also check your chain wear... in fact, a chain should wear out faster than the gears it came with, so it's a more likely culprit unless you've already changed your chain once or twice. As usual, Sheldon can tell you the drill: http://www.sheldonbrown.com/chains.html#wear
10-19-05, 06:57 PM
Is your rear derailler adjusted properly?
Is your quick release tight?
When you torque the rear may be flexing and allowing the bike to ghost shift on you.
Powered by vBulletin® Version 4.1.12 Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.