Bicycle Mechanics - Sturmey Archer 3/4 speed and a MTB frame
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
10-31-05, 09:19 AM
Has anyone tried to install a 3/4 speed sturmey archer hub in a MTB frame that has 135 rear spacing ?
10-31-05, 10:40 AM
I've thought of doing it. You need a steel frame, so that it can be cold-set. That much squeeze will make it neccesary to re-align the dropouts as well, otherwise they'll point inwards too much.
Are you building a new wheel for the hub? 26"xfraction is different from 26" x decimal
Remember the horizontal dropouts. You'll want to be able to adjust the chain.
Powered by vBulletin® Version 4.1.12 Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.