Singlespeed & Fixed Gear - sorting out chainline
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
Currently the front chainline is 46 mm, the rear is 50. I don't want to respace the hub as it is now symmetrical. Could I use spacers between the crankarm and the chainring?
01-15-06, 11:29 AM
Same sorta thing with me...just got low-flange dura-ace hub+chainline doesnt line up straight. It aint to bad just alota noise coming from the chain catching but it's not falling off or anything. Im running miche primato cranks so i cant put the chainring on the opposite side+since iv a track frame there's no space for hub adjustment.The only ting i can ting of is iv a really crappy chain(might be one of those small width ones) if i changed to a 1/8th izumi jobs might that fix the problem??
the obvious solution - different bottom bracket.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.