Bicycle Mechanics - 03 TCR 1 (alloy) derailleur question
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
01-17-06, 03:48 AM
Anyone out there with a Giant TCR 1 alloy frame/bike know which size front derailleur it takes. I can get a braze on, but I need to know which size adaptor clamp to buy. I'm building an 03 frame up with Ultegra components. I have a triple crank with a 10 speed cassette. Also (maybe this doesn't apply, but) do I need to use a long cage or short cage rear derailleur? My apologies if this is a redundant question, but I can't get the search engine to work.
01-17-06, 03:58 AM
Sometimes one measurement is worth a thousand guesses. You don't even need a caliper. Wrap a piece of paper around your seat tube and mark where it crosses itself. Measure that distance in millimeters and divide by 3.14. That's the seat tube clamp size.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.