Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.freeranger
01-21-06, 12:20 PM
Just installed a SRAM 8-spd cassette, 11-32, onto an LX hub, the freehub body splines do stop short of going all the way to the outer end, but when on the 11T or 12T rear cogs, there is a noticeable "rumbling", it just isn't smooth. Should I have used a 1mm spacer? If so, in what position do you place the spacer. BTW-the 11T and 12T gears are not attached to the rest of the cluster, if that makes any difference.