Bicycle Mechanics - Shimano Ultegra Brakes - quick question
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
02-21-06, 12:19 PM
A quick question - how does one release Shimano Ultegra brakes so a tire can be replaced? There must be a way to do it so that the brake adjustment stays the same. Help appreciated.
Shimano brakes have a little lever off to the left side that acts as the brake release. Just flip it up (rotate clockwise) and the brake calipers will spread apart far enough to allow you to remove your wheel. Note that some tyres may be a little too wide to properly clear the brake pads even with the calipers fully open. In that case, you will need to play with the cable adjustment knob to release more cable. Ideally, your brakes should be set up so that with the release fully open you can remove the wheel with no problems and likewise when the release is closed, the pads should be positioned a scant few millimeters from touching the braking surface.
02-21-06, 12:37 PM
Powered by vBulletin® Version 4.1.12 Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.