Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.Todd Richards
04-06-06, 10:05 AM
I got a used Merlin Agilis Ti frame with Campy chorus crank/BB installled. Crank creeked when standing so I put a 1/8 turn on the BB lockring (non-drive side) using genuine Campy tool and creek almost all gone.
Tried to tighten again and STRIPPED all teeth of inner lockring. I'd like to remove bottom bracket and replace, would like to replace with compact (non Campy) so my concern is removal, not necessarily saving.
1) Don't have blow-tourch would this work should I bring to shop?
2) If I remove crank witll other side loosen for removal?
Tried to tighten again and STRIPPED all teeth of inner lockring. I'd like to remove bottom bracket and replace, would like to replace with compact (non Campy) so my concern is removal, not necessarily saving.
1) Don't have blow-tourch would this work should I bring to shop?
2) If I remove crank witll other side loosen for removal?