Singlespeed & Fixed Gear - Duratec Track Frames?

Does anyone on the board have any experience with these frames?
I havnt ever seen one around, but suddenly there are a number of them on ebay.
Yojimbo is selling them, so maybe bfffgCHI know something about them?

http://cgi.ebay.com/Duratec-Magnetic-T8-TRACK-BIKE-FRAME-frameset-53cm-NEW_W0QQitemZ7232614638QQcategoryZ98084QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

A

sorry if this is a re-post. the board is dragging a little bit today.

needs more logos.

Nothing a sharpie cant fix.

good friend of mine Dave races an older model here at ERV.
Stiff and bladelike. Cuts through slow packs like a Ginsu knife cuts through jello. I pushed it around the track a few laps - good ride indeed

A bit overpriced in an already glutted market.

There's been a grip of them up on ebay lately. From what I can tell they're relatively common upper-mid-level European jobs. I don't know anything about the tubing, but the build looks solid. About par for the price, though 800 is a lot to blow on a frame you don't know that much about.

They're from Poland, seriously.

I wouldn't say they're overpriced. A little expensive, but they have a great reputation over in Europe. Super stiff, and amazingly light. If i had the cash, I'd be all over one. Honestly, it'll probably be my next bike purchase. It would be a great race bike.

I wouldn't say they're overpriced. A little expensive, but they have a great reputation over in Europe. Super stiff, and amazingly light. If i had the cash, I'd be all over one. Honestly, it'll probably be my next bike purchase. It would be a great race bike.

Michael Jackson has a great reputation in Europe too.

I mean, really, what's the point? I'm not European. I don't plan on being European.

They can't even sell 'em on eBay.

The point is that they're really nice bikes. I'm pretty sure they just started importing them to the US, so naturally, not many people are going to know much about them.

They're cool. Those Krakow Kielbasas should be devoured in Chicago and Milwaukee! And maybe Buffalo.

Bad raygunner, bad! :p

As for the frame, looks good to me!

the duratec v6 in my svt contour kicked ass. that's all i really have to say.

They're made from old ford duratec engines... super heavy and prone to problems.

HAHAHAHA props for the contour. Turbocharged Duratecs are used in Nobles too. I'd sell a kidney to get one of those.

As for the Duratec frame, I'd wish I'd seen those when I chose my fetish position frame. For some reason black frames were callin' my name when I was last shopping and I wasn't able to find any old pista concepts in my size so I went with the fetish. It looks weird as heck even though I built it up with a nice parts spec, I think its the tall geometry (I'm talking about my Fetish, not the duratec).

Anyone know of any nice black aluminum or steel frames for around $500? The TK2 and Duratec are a little too much unless I can find them for cheaper, I may end up switching up my fetish for a black barenuckle or pake. You guys have any recommendations?

reminds me of this

http://www.chucksbikes.com/store/fr076a.htm
http://www.chucksbikes.com/store/big_fr076a.jpg

it's nothing like the generic, mass produced then rebranded Tsunami frames.

The duratecs are psuedo-custom. you contact them and you're able to spec out the color scheme you want (we got both in matte black) and the measurements for TT, ST, and other things. We ordered 2 for the shop, a 56 and a 53 and their serial #s are right next to each other. Hand built, strict quality control - these are definitely race frames - nothing cheap about them.

I like the "made in the european union" sticker myself.

Not that teadoggg's biased or anything...

The welds look nice but if if I'm going to pay $800 for an aluminim, made-for-track frame I don't want any brake holes...

I get nothing if it sells - it's not mine. i just think it's a cool frame. the holed carbon fork kinda turns me off a bit, but the more I watch the *good* track racers, they're on ugly bikes with stems w/positive rise, and big, wide, goofy road bars. Function over fashion.

It reminds me of my cannondale that I sadly just sold. Well, the frame part of it - not the fork.

seems to be a lot of the Magnetic T8 frames on ebay via Ben's Cycle lately.

HAHAHAHA props for the contour. Turbocharged Duratecs are used in Nobles too. I'd sell a kidney to get one of those.



The US importer of Noble cars is based in an exurb of Cincinnati - close to my main training stomping grounds. I've only seen them out on the open road a couple of times; all I can really say is that they're effing hot and their drivers give cyclists a decent berth.

They're from Poland, seriously.

Czech.

http://cgi.ebay.com.au/DURATEC-MAGNETIC-T8-TRACK-FRAMESET-54cm-Polar-White_W0QQitemZ170056831562QQihZ007QQcategoryZ98084QQrdZ1QQssPageNameZWD1VQQcmdZViewItem

They have been reappearing lately (for a lot cheaper). Is it a good deal? What are they like?

They're from Poland, seriously.
Nay, www.duratec.org says they are from Czech Republic.
Edit: sorry get_nuts beat me to it

http://cgi.ebay.com.au/DURATEC-MAGNETIC-T8-TRACK-FRAMESET-54cm-Polar-White_W0QQitemZ170056831562QQihZ007QQcategoryZ98084QQrdZ1QQssPageNameZWD1VQQcmdZViewItem
Does anybody else think it's funny that they call an Aluminum bike "Magnetic"?

Does anybody else think it's funny that they call an Aluminum bike "Magnetic"?

Don't you think that by feeding the dead to the living and still somehow harvesting energy from humans, the machines in The Matrix are violating the laws of thermodynamics?

Michael Jackson has a great reputation in Europe too.

Haha, no. Here he would've been sentenced...
Europe (Britain, Germany and France) has a richer track history and more present success (AFAIK) than the US so I guess European opinions on track kit are relevant.

I just ordered one. The seller sent me an email informing me the Czech is in the mail.

wakka wakka

Don't you think that by feeding the dead to the living and still somehow harvesting energy from humans, the machines in The Matrix are violating the laws of thermodynamics?
Apparently you missed the caveat in Morpheus's explanation...

The human body generates more bioelectricity than a 120 V battery and over 25.000 BTU's of body heat. Combined with a form of fusion the machines had found all the energy they would ever need.

The real question is, if they had the fusion, why would they even need all the elaborate machinery and such to enslave humanity? Or is that their actual goal, and not just a means to an end?

I just ordered one. The seller sent me an email informing me the Czech is in the mail.

wakka wakka

zing!

Apparently you missed the caveat in Morpheus's explanation...

The real question is, if they had the fusion, why would they even need all the elaborate machinery and such to enslave humanity? Or is that their actual goal, and not just a means to an end?

man, any mention of "fusion" in a movie is a complete explanatory cop-out. it's basically a one-word stand in for [blah blah blah science meets witchcraft that we can't explain so let's look for something to say]. they fuse dead people with living people and somehow wind up with more energy? BAH, I SAY, BAH!

i <3 witch science. warlock science too!

Weren't we talking about european bike frames a moment ago?

There are a lot of really nice aluminum track frames out there. If you're looking in this price range, you might also check out Dolans which have a bit better track geometry. You can also check Siegler Imports for their CSK frames. They still have some from 2006 on deep discount. The CSK pursuit frame is pretty radical and a really nice ride. The only problem I've seen with it (and not an uncommon problem with aluminum track frames in general) is that there isn't clearance for bigger tires (25-28 mm). It's assumed you're riding track tires or track training tires (like Conti Sprinters) and nothing bigger.

i saw one of these today in seattle.


http://www.duratec.cz/index.php?page=frame&idFrame=17&idCat=15
would this be a good buy, versus say a masi coltella?