BMX - Chaindisc spacer?

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.



PDA

View Full Version : Chaindisc spacer?

MikeHunt79
04-11-06, 07:09 PM
I bought one of these chainrings, but I am having problems with it:

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=7224629896

I found that the hole in the middle was too big. It seems to be around 25mm or so. I'm using profile cranks, and I think these have a 19mm spindle, so are there spacers avaliable so I can fit this chainring. If so, are they sold in the uk?

CMcMahon
04-11-06, 07:43 PM
The hole on 99% of sprockets is 15/16" (which is the diameter of the spindle area on a one-piece crank). You need to pick up a hat spacer; just go to your local bike shop, and tell them what the problem is. They're as cheap as dirt.
Brian
04-11-06, 09:28 PM
Clear, clean, and simple. I wish all threads were like this.

Prozakk
04-11-06, 09:35 PM
The hole on 99% of sprockets is 15/16" (which is the diameter of the spindle area on a one-piece crank). You need to pick up a hat spacer; just go to your local bike shop, and tell them what the problem is. They're as cheap as dirt.

What, no insults? Are you ill?
MikeHunt79
04-12-06, 03:40 PM
Nice one... Thanks... It does seem to be around 15/16", so I'll mention that when I visit the bike shop.
mude
04-12-06, 03:43 PM
What, no insults? Are you ill?
you couldnt jsut leave it be

neither could i.
Prozakk
04-12-06, 06:07 PM
you couldnt jsut leave it be

neither could i.

;) :D