Singlespeed & Fixed Gear - My Sugino RD chainring is not "true"
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
05-05-06, 11:03 AM
That's it. I'm getting the Sugino 75's. My chainring for the RD's is pretty damn round--but then today I noticed that it's not true at all! It wavers back and forth a couple mm. Grrrrrr...
Any of you have this problem too?
05-05-06, 11:07 AM
It's a common problem with lower end chainrings.
Go 75, you'll feel a world of difference instantly.
05-05-06, 11:08 AM
Tighten your chainring bolts, and then bend it true. You just saved $200.
05-05-06, 11:09 AM
if it wavers back and forth, it could be your spider.
that can be fixed with a mallet. seriously. done it w/ no problem.
05-05-06, 12:05 PM
My chain ring looks bent too, but I've taken it off and layed it on a flat surface and its pretty true. Also try moving the crank to a different position on the spindle, and if it still bends in the same spot, it the spider (not the spindle). Look on sheldon brown's site...
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.