Bicycle Mechanics - Mounting a used tubular
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
05-09-06, 09:09 AM
I had to remove a fresh tubular to change the valve extender. What do i need to do to remount this. Both the tire and rim have glue residue on them... do i need to remove all of this or just apply some more glue on top of the old on the rim and tire and put 'em back together.. ?
05-09-06, 10:09 AM
I believe the correct response is to clean off as much of the old residue as possible before applying new glue (or, Tufo tape).
05-10-06, 12:01 PM
i wouldn't worry about it...if it starts to give you problems, then clean off the excess glue and start again.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.