Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.brianappleby
05-12-06, 02:13 PM
I hopped on the Mike Garcia bandwagon and got a set of wheels. The rear hub is 10 speed specific. When installing the casette, does this mean I should't use the metal spacer between the hub and the largest gear? There is a flange on the freewheel body, so the spacer only slides about 1/2" from the tip of the axle anyway.
I have an ultegra 12-25 casette.
I actually already did this and it seems to be working fine on a short test ride. I just don't want my rear wheel to explode or something in the middle of my next long ride.
thanks for any ideas
Brian.
I have an ultegra 12-25 casette.
I actually already did this and it seems to be working fine on a short test ride. I just don't want my rear wheel to explode or something in the middle of my next long ride.
thanks for any ideas
Brian.