Bicycle Mechanics - "Ponging" sound on my front wheel
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
05-12-06, 09:50 PM
I have a handcycle (hand cranks drive the front wheel, two wheels in back,) It has just started to make a "ponging" sound from the front wheel. The sound occurs whether or not I'm pedaling and I hear it almost constantly. I thought it was spoke related however... LBS said the spokes were adjusted correctly and the gear cluster was not loose. I'm very open to ideas, thoughts, etc.......Thanks, KenhReed
05-14-06, 10:04 PM
I am not totally familiar with hand driven cycles, but I will give this a shot. Since you said that the "ponging" sound occurs even when you are not pedalling, then it sounds like a hub problem. Check the hub axle and see if it needs adjusting. Perhaps the axle cones are adjusted too tight or there is a bearing problem -either needs greasing or the axle cones are worn. If there is a plastic or metal spoke protector behind the freewheel (is there a freewheel on the front wheel ?) maybe it is rubbing against the spokes. Sometimes the hub threads that a freewheel threads onto is not perfectly straight and the freewheel wobbles around the hub -possibly rubbing against the spoke protector. Another idea could be spokes rubbing against each other where they cross. Is the wheel tight in the frame or is it shifting slightly as the bike moves ? Check for tightness. Possbile rubbing of the wheel against any brake shoes ? Here are my suggestions, hope it helps you.
05-14-06, 11:49 PM
Appreciate the input. I'm going to try your suggestions, , in order one by one, Monday after work.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.