Bicycle Mechanics - 1" threadles stem riser?
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
05-19-06, 10:05 PM
I've seen the Delta 1&1/8 inch threadless stem riser, but does anyone make a similar product for one inch threadless fork tubes? Thanks.
05-20-06, 12:21 AM
If not, you may have to use a shim and go with a 1 1/8" stem...
I need one a while ago for a frame/fork I bought off of ebay. Found one at what seems to be a common stop for bf members... http://sheldonbrown.com/harris/stems/index.html . Scroll down a little and there they are.
Hey, that's my first post:) (hopefully it works!)
05-20-06, 10:23 AM
...Hey, that's my first post:) (hopefully it works!)...
Not only did it work, Root, it was EXACTLY what I needed. THANKS!
Powered by vBulletin® Version 4.1.12 Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.