Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
05-27-06, 08:48 AM
I only have 5mm brake cables coming out, but it's not "snapping in" to place. This has turned out to be the most difficult thing in building up a frame so far!
Any suggestions would be appreciated...
05-27-06, 11:26 AM
if you haven't tried it already, try seating the stiffer side of it first (the one with more material) and then popping the more flimsy side in. or vice versa...i wish they made those things out of a softer rubber, rather than the hard plastic.
i don't use them. they only serve to make the bar/brakes look "cleaner," (i happen to think it makes them look janky) and are, as you've exerienced, a pain in the ass to install. i'll usually try only a couple times to get them in (sometimes they go in no problem) before i pull the whole thing apart again and take them out. the cable housing won't wear away at the clearcoat on the carbon, because in most cases, the housing is softer than the clearcoat, and the housing also isn't usually going to move against it as you turn the handlebars. so there's no danger in not using them.