Nicholas482109
05-28-06, 10:28 PM
I got a Cateye Velo 2 from a buddy of mine and I'm a little confused on how to program the wheel circumference. It starts with a number, 205, is that the circumference in centimeters?
Bicycle Mechanics - Programming a Velo 2
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.View Full Version : Programming a Velo 2
rangthrower
05-28-06, 10:50 PM
Here is a link to Cateye's website/instruction manual.
Hope it helps.
http://www.cateye.com/en/pdfs/VL200v4_E.pdf
Hope it helps.
http://www.cateye.com/en/pdfs/VL200v4_E.pdf
Nicholas482109
05-28-06, 10:59 PM
well I've been looking at that, it just says to get my wheel circumference. i did it was 83 inches and i converted it to centimeters and it was 210.83 so I put in 211, hope it was right
HillRider
05-29-06, 07:42 PM
209 or 210 are the usual settings for 700x23 tires. Use 209 if you want to be slightly conservative.