concernicus
06-01-06, 07:58 PM
anyone know of/have a super sweet 1 inch threadless stem with anywhere between 5 and 15 degree rise (im gonna flip it over of course)? i cant find anything worthy of being on my bike.
Singlespeed & Fixed Gear - need a cool stem
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.View Full Version : need a cool stem
hyperRevue
06-01-06, 08:03 PM
Yeah, you better flip that **** or you'd be ****ing lame.
marqueemoon
06-01-06, 08:26 PM
Maybe your bike should get over itself. ;)
zerobug
06-01-06, 08:38 PM
Just a note: finding a 1" threadless stem is tricky... you're better off using a 1 1/8th" stem with a shim... at least as far as selection goes.
chzman
06-01-06, 08:38 PM
nothing is too sexy for some thomson x2 lovin
neverwrite
06-02-06, 02:20 AM
On a bike-snob note, I am kinda disturbed by the fact that you specify an angle but not extension. Does no one care aout bike fit?
That said, I have a few 1" threadless stems that I will never use.
I have an old 120 mm salsa, 75 degree, 1 inch threadless, 26.0, black powdercoat. Sleek and damn stiff. I also have:
-a 130mm hi-rise 1" threadless 25.4 mtb mikkelsen stem, removable face plate, heavy and goofy looking.
-1" threadless interlock, 95 degree, 130mm, 26.0
-a 90mm 1" ~110 degree threadless grey ritchey.
I would be down to trade/sell any of these and I will probably be at hellyer this saturday.
-jim
That said, I have a few 1" threadless stems that I will never use.
I have an old 120 mm salsa, 75 degree, 1 inch threadless, 26.0, black powdercoat. Sleek and damn stiff. I also have:
-a 130mm hi-rise 1" threadless 25.4 mtb mikkelsen stem, removable face plate, heavy and goofy looking.
-1" threadless interlock, 95 degree, 130mm, 26.0
-a 90mm 1" ~110 degree threadless grey ritchey.
I would be down to trade/sell any of these and I will probably be at hellyer this saturday.
-jim
crankstar
06-02-06, 04:05 AM
On a bike-snob note, I am kinda disturbed by the fact that you specify an angle but not extension. Does no one care aout bike fit?
have you seen the bikes people on this thing ride? fit has to be the farthest thing from there mind.
have you seen the bikes people on this thing ride? fit has to be the farthest thing from there mind.
travsi
06-02-06, 04:22 AM
if you got the money, i bet a jonnycycles (http://jonnycycles.com) stem would be worthy...
http://jonnycycles.com/images/s0001%20011.jpg
http://jonnycycles.com/images/s0001%20011.jpg
ka12na
06-02-06, 04:54 AM
Now that's a hot stem.
daibutsusan73
06-02-06, 06:39 AM
nothing is too sexy for some thomson x2 lovin
+1 but it's 1 1/8" so you'll need a shim. They also come in silver
http://www.lhthomson.com/gallery/X2front3_4.jpg
+1 but it's 1 1/8" so you'll need a shim. They also come in silver
http://www.lhthomson.com/gallery/X2front3_4.jpg
1fluffhead
06-02-06, 07:17 AM
3t Mutant or Cinelli Vai will both work and come in 1" threadless.
Pipebomb
06-02-06, 02:34 PM
https://secure3.nexternal.com/icycles/images/ritcheystem.jpg
icycleusa.com has em for 10.98!!
icycleusa.com has em for 10.98!!
trons
06-02-06, 06:02 PM
...custom stem jig....
very cool.
very cool.
trackandtrials
06-02-06, 06:10 PM
As much rise or drop as you would need from my custom stem jig....
Fillet brazed or lugged....your choice.
DW
Is that 80/20 I spy?
Fillet brazed or lugged....your choice.
DW
Is that 80/20 I spy?
concernicus
06-02-06, 06:22 PM
ive decided to go w/thomson and a shim. i dont want the x2 because those are for 31.8 bars only. so im sticking with the elite. thanks guys
...or should i have paul sadoff make me stem?...
...or should i have paul sadoff make me stem?...
popluhv
06-02-06, 06:31 PM
I wish Kooka and Ringlé still existed.