Bicycle Mechanics - Bottom Bracket- which length spindle?
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
I'm rebuilding a Trek 930. I pulled out the bb and it's an LP27, 73mm shell, and when I measure the spindle- with a pair of accurate calipers- the length comes out to 114mm. Looking for bb's I see 113 and 115 are standard lengths, but not 114. I'm guessing the 114mm spindle I have is considered 113mm or 115mm for some reason, but I don't know which. Now, on one side of the spindle there's a metal ring that goes around it that says LL113. Can I assume that means 113mm spindle?
Regardless, either should work fine.
06-09-06, 03:37 PM
If you err on the longoer side you can also slap in a few of the supplied spacers. A few mm either way isn't a lot.
Powered by vBulletin® Version 4.1.12 Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.