Bicycle Mechanics - Steer Tube Too Short

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.



PDA

View Full Version : Steer Tube Too Short

Kurto
06-09-06, 06:50 AM
I just got a new fork (1" threaded) but it's about an inch short of where it needs to be to engage the top of the headset. Is there anything that can be done beyond getting a different new fork with a longer steerer? Thanks.

supcom
06-09-06, 07:02 AM
You could check with the manufacturer about replacing the steerer tube, but it's probably not very cost effective.
Kurto
06-09-06, 08:36 AM
You could check with the manufacturer about replacing the steerer tube, but it's probably not very cost effective.

It's the $40 Martec M3 from Chuck's Bikes. I was just hoping there was a cheap ghetto extender fix of some sort. I might just take the loss.

OneTinSloth
06-09-06, 10:55 AM
there's nothing you can do to make the steerer tube longer, aside from what was mentioned above. you should always measure before you order. for threaded forks, you need to know the steerer tube length, and the length of the threaded portion of the steerer tube.
Kurto
06-09-06, 12:45 PM
there's nothing you can do to make the steerer tube longer, aside from what was mentioned above. you should always measure before you order. for threaded forks, you need to know the steerer tube length, and the length of the threaded portion of the steerer tube.

No ****. Unfortunately that ship has sailed already.