eightdip
06-10-06, 04:41 PM
im swapping over my sprocket on my bike and i can't take the cranks off. Ive taken off the bolt but they just dont come off. any suggestions?
View Full Version : Taking my cranks off
Mikato Soul
06-10-06, 05:04 PM
What type of crank do you have, you might need one of these: http://flatlandfuel.com/category.html?UCIDs=849786%7C889269
It should help you remove your sealed bearing profile premeium or ares 88 type cranks.(Please excuse the spelling)
It should help you remove your sealed bearing profile premeium or ares 88 type cranks.(Please excuse the spelling)
eightdip
06-10-06, 05:32 PM
my cranks came off my fit complete and they are like the profiles (tubular and no pinch bolt) but they tighten with an allen key bolt not a socket. I think i will have to get a crank remover
KinetikBiker
06-11-06, 08:01 AM
You may need a crank puller, if the cranks are similar to Profiles...
Take your bike to a bike shop, unless you have a crank puller, or a freind that knows what they are doing.
Take your bike to a bike shop, unless you have a crank puller, or a freind that knows what they are doing.
lunchbox
06-11-06, 03:30 PM
You may need a crank puller, if the cranks are similar to Profiles...
Take your bike to a bike shop, unless you have a crank puller, or a freind that knows what they are doing.
everyone i know with profile cranks uses a socket to get the sprocket bolt off.
Take your bike to a bike shop, unless you have a crank puller, or a freind that knows what they are doing.
everyone i know with profile cranks uses a socket to get the sprocket bolt off.
eightdip
06-11-06, 03:51 PM
ive got the bolt off, its just that they wont budge. Im gonna borrow my friend's crank tool tomorrow
lunchbox
06-11-06, 10:06 PM
ive got the bolt off, its just that they wont budge. Im gonna borrow my friend's crank tool tomorrow
15mm socket i beleive is the size.
15mm socket i beleive is the size.
vBulletin® v3.7.3, Copyright ©2000-2008, Jelsoft Enterprises Ltd.