[quincy]

this is really general, but can anyone give me info on gt track frames. i am looking into buying one but am having trouble researching them. i believe it is from the late 90's. are they decent quality or just cheap, built-for-the-mainstream track bikes? are they sized like traditional track bikes (the seat tube seams to be at a steep angle so I wonder if that affects the measurement)? any info would be helpful.

[The BikeForums Team]

This is an archived thread, you can find the full version of this thread, with images, links and more content here.

Ready to buy? Check out these two online bike stores:
- http://www.nashbar.com (you can find the latest bike nashbar coupons in this thread)
- http://www.performancebike.com (you can find the latest performance bike coupons in this thread)

Cya on the forums,
- The BikeForums Team
- http://www.bikeforums.net

[same time]

Here's what I know, somebody correct me if I'm wrong:

GT made two track bikes - the Pulse and the GTB. The Pulse was the nice one, and the GTB, well, that stood for "Generic Track Bike". Both frames were aluminum and looked quite similar, and to tell you the truth, I'm not sure what the difference was. Probably a nicer alloy on the Pulse. The Pulse was made for a longer time than the GTB, and older Pulses looked more traditional. Both were designed for the track, so they have a short wheelbase and tall-ish bottom bracket.

I have a GTB, and it's not the nicest looking frame in the world - the welds are big, globby, and asymmetrical. But, the frame is straight, and has proven to be durable on the streets of NYC and DC for almost ten years now. The frame sizes are just like any other bike, but when you set the bike up so it fits you, it will look weird because there will be very little seatpost showing.

The headset is 1 inch threaded... what else can I tell you? I paid something like 700 dollars for mine in 1996. Most of the parts that came on it were trash, except the cranks and bottom bracket. I have replaced every part on mine.

Oh, the aluminum rear fork tips are really soft, and are easily chewed up by the track nuts when you tighten the wheel.

[quincy]

that helps a lot. thanks

[eyefloater]

Here you go: http://www.epinions.com/bike-Bicycles-All-GT-track_trials

Click on any of the links, then "View Details."