Mountain Biking - New guy with question
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
07-05-06, 08:56 PM
I have an older GT Avalance that I bought without a front susupension. I am looking to add one to it, but the guy at my local bike shop said it would throw the bike way off by putting the tire out too far forward. Said the bike was not "designed" to have a front suspension. Is he full of crap, or am I really not going to like the outcome of adding a front suspension. I love everything else about the bike. Deore everything etc etc.
Thanks for your help.
07-05-06, 09:04 PM
What year? He's referring to the head tube geometry, which affects the handling characteristics. Some bikes built in the suspension fork "transition years" were built with both rigid & suspension forks in mind.
If you can find a 60mm travel fork you're likely not going to throw the feel of the bike off much. Put a 140mm travel fork, and you'll feel like you're on a chopper.
Watch out! I don't know GT's history, but your frame may require a fork with 1" steerer tube, which are getting harder (i.e. more expensive) to come by.
07-05-06, 09:11 PM
Thanks a lot for the help. the guy sounded like he was on the level. the bike was purchased with a ridgid fork in 1999. I guess I always thought I could upgrade later.
07-05-06, 09:53 PM
Just do it. It won't throw it off that much. I think that guy is full of it too. Don't put anything over 80 mm of travel on it though.
Powered by vBulletin® Version 4.1.12 Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.