Riles
07-07-06, 03:41 PM
Just installed one and I am pretty sure the compression dial on the fork itself that the pop loc cable is attached to is faulty.
It doesn't spring back to open position - in fact there is no spring in it at all. If I do not turn the dial on the fork manually it is in semi lock mode.
The Reba pop loc I have springs back to open pretty firmly when released.
Am I missing something with the SID or do I need to get it replaced as I suspect ?
It doesn't spring back to open position - in fact there is no spring in it at all. If I do not turn the dial on the fork manually it is in semi lock mode.
The Reba pop loc I have springs back to open pretty firmly when released.
Am I missing something with the SID or do I need to get it replaced as I suspect ?
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.