Bicycle Mechanics - how to lower travel?
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
07-13-06, 12:21 AM
i have been looking for some information on how to do this. My fork is a z1 freeride 2 from 2004, it has 130mm and i was curious how to do this modification. Information on doing this to dirt jumper would work too, as i beleive they are very similar. I'd like for knock is down to like 90-100mm. also, would it make my fork stiffer? short n stiff, thats what i'm shooting for
Are you bottoming the fork?
07-13-06, 03:45 AM
right now, only on the things that it should bottom out on like harsh drops to flat
07-13-06, 11:47 AM
Yeah, it can be done but you will have to send it to marzocchi to do it for you.
So give marzocchi a call
07-13-06, 02:14 PM
that sounds too complicated and probably costs money, and there would be time off the bike :( If it is anything like the other forks i've changed oil on, don't i just put in a shorter spacer?
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.