Singlespeed & Fixed Gear - Question for those who use Shimano 600 cranks...
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
07-19-06, 12:28 PM
With the chainring on the outside:
1. What side BB are you using?
2. What is your chainline?
I'm planning a new build and will most likely be using these cranks. I'd like to get my chainline nailed from the get-go.
Is there anything I should be taking into consideration?
Any help appreciated.
07-19-06, 01:56 PM
I had a pair of 600 (old ultegra) cranks on my cross bike when it was fixed/ss a few years back. I can't remember the any thing specific about them other than they worked great. A friend of mine crashed riding fixed in a cross race and killed em. I would still have em other wise.
07-19-06, 02:23 PM
115mm Shimano BB, 600 cranks with ring on the inside.
chainline bang on.
edit: soma/nashbar hub
07-19-06, 03:15 PM
^+1 with an IRO hub
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.