Bicycle Mechanics - Cannondale Six13 (2006) derailleur clamp diameter
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
08-10-06, 08:55 AM
I discovered to my chagrin that it isn't 32mm (which apparently it was in 2005), and my crude measurement of the seat-tube circumference suggests that more than 35mm is in order. Does anyone out there know this magic number? I'm trying to get a campy FD to fit this bike.
08-10-06, 10:47 AM
Email Cannondale (firstname.lastname@example.org) and ask them. They are always very quick to respond and quite helpful.
08-11-06, 12:20 PM
Thanks for the tip - custserv was very responsive as you suggested. I got the answer I needed, which was that the clamp diameter is 34.9mm.
That does it for this thread. I'm going to go get myself a 34.9mm clamp to use with the braze-on derailleur I have in reserve.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.