Singlespeed & Fixed Gear - Where can I find French Threaded Track Cogs
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
08-13-06, 04:20 PM
I recently purchased a Zeus track bike and I need to change the gear ratio. I am trying to find a 19t or 20t cag for a zeus hub that is french threaded and haven't been able to find anything. Any help finding one would be appreciated.
I couldn't find anything with a quick search, but perhaps you could try some french online stores.
I'm pretty sure only the lockring is French threaded, but I could be wrong...
i have no trouble putting an eai cog on a zeus hub
08-14-06, 05:23 PM
when was your zeus hub made?
08-14-06, 07:28 PM
did you grab that zeus from the bost CL? That was a steal.
The cog isn't French-threaded so an EAI will work fine. The lockring is French threaded. The easiest place to get a lockring is to ask a Mavic dealer to get one for you -- it's the same lockring that's used on Mavic Comete carbon discs and on Ellipses. Cost is about $8. I don't know of anyone anywhere who uses French threading other than Mavic.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.