Singlespeed & Fixed Gear - Dimension track hub dimensions

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.



PDA

View Full Version : Dimension track hub dimensions

mb0686
08-14-06, 03:28 PM
I hope you dont mind puns :)
Anyway, I'm trying to buy a Dimension rear hub and some spokes but I cant find the hub dimensions anywhere. If anyone knows it would be a big help, thanks!

dirtyphotons
08-14-06, 03:33 PM
i bet these guys (http://www.dimensionbikeproducts.com/contact.html) know
trons
08-14-06, 04:19 PM
according to nashbar (nashbar hubs are dimension iirc)

specs for wheelbuild:
flange diameter: 71.5mm
p.c.d: 62mm
o.l.d: 100mm

mb0686
08-14-06, 05:23 PM
according to nashbar (nashbar hubs are dimension iirc)

specs for wheelbuild:
flange diameter: 71.5mm
p.c.d: 62mm
o.l.d: 100mm

I didnt think to check the nashbar ones, thanks alot.
noriel
08-15-06, 08:31 AM
You might wanna recheck those measurements, if it's a rear hub. OLD should be 120mm.... DO you have the hubs already, or are trying to round up all the parts beforehand?
trons
08-15-06, 10:41 AM
oops, wrong one. here is rear:

use----------FLIP FLOP TRACK/SINGLESPEED
weight-------314 GRAMS
drilling-----32 HOLE
skewer-------NO
spacing------120 MM
hub body-----ALUMINIUM
bearings seals-CARTRIDGE
finish-POLISHED CLEAR COAT
dimension----72mm FLANGE
HUB HOLDS A FREEWHEEL/OR SINGLE SPEED COG ON EACH SIDE TO ACCOMADATE A VARIATION IN GEARING
Other specs for hub:
Spoke Hole Diameter: 62mm
Locknut To Flange(L): 18mm
Locknut To Flange(R): 18mm
Over Locknut Width: 120mm
REAR - 10mm dia axle thread pitch of 1
FRONT - 9mm dia axle, thread pitch of 1