Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.njwbert
08-17-06, 05:04 AM
I have installed the campagnolo ergobrain on my bike and now the gear indicator for the right shifter is not working while the left is fine. Upon taking apart my shifter, I discovered that while the slot alignment for the ergobrain sensor plug is horizontal, the slots are aligned vertically on my washer. I tried to troubleshoot it but it seems something has slipped. I can't really tell what because the shifter functions normally and has no loss in performance. I am using a 10 speed Record Ergopower 2006. I think the bushing for the flat spring has slipped as i cannot perform step 14 in the link below.
http://www.velonews.com/tech/rev/levers3.html
Anyone has this happen to their ergopowers when using ergobrain and any advice on how to prevent this?
http://www.velonews.com/tech/rev/levers3.html
Anyone has this happen to their ergopowers when using ergobrain and any advice on how to prevent this?