Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.beaverstuff
08-29-06, 09:00 PM
Hi,
I'm refurbishing a fixie Burley, which is missing some parts, noteably the steering mast.
I have a threadless, fork, the steer-tube of which is 1 1/8 OD. I have an 18 inch stem, 1 inch OD, which is really nice, but I can't put the two together. I came across this Delta 'stem adaptor' (see image) which almost did the trick. It allows 0.833 stems to fit onto a 1 1/8 fork. Shucks . . .
Does anyone out there have such an adaptor that with mate a 1 inch stem with a 1 1/8 threadless fork?
I'm refurbishing a fixie Burley, which is missing some parts, noteably the steering mast.
I have a threadless, fork, the steer-tube of which is 1 1/8 OD. I have an 18 inch stem, 1 inch OD, which is really nice, but I can't put the two together. I came across this Delta 'stem adaptor' (see image) which almost did the trick. It allows 0.833 stems to fit onto a 1 1/8 fork. Shucks . . .
Does anyone out there have such an adaptor that with mate a 1 inch stem with a 1 1/8 threadless fork?