Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.eaglevii
09-04-06, 12:11 AM
I am trying to center my chainring as described here under chain tension:
http://sheldonbrown.com/fixed.html
but one of the stack bolts is stuck. It just turns in the crank spider, and will not loosen. What sort of tool am I supposed to use to hold the back side of the bolt (with the two slots across from each other) still while I turn the front side (the 5mm hex)? Or is there some other trick to this?
Hopefully I'll have this damn bike together tomorrow... so close.
http://sheldonbrown.com/fixed.html
but one of the stack bolts is stuck. It just turns in the crank spider, and will not loosen. What sort of tool am I supposed to use to hold the back side of the bolt (with the two slots across from each other) still while I turn the front side (the 5mm hex)? Or is there some other trick to this?
Hopefully I'll have this damn bike together tomorrow... so close.