Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.crewman
03-12-03, 08:11 AM
I have been getting my trusty steeds ready and have just cleaned and regreased my Campy Hiddenset. I was putting it back together and could not find the recommended torque spec's
When tightening the plug for the carbon fork to take up the slack in the bearing, whats the torque spec on the plug? I thought it was like 7nm or something.
Also I have a 3T forgie stem with a single bolt clamp. Anyone hazard a guess what the spec on that should be?
I have also added a new LOOK Ergo Post to my LOOK
Carbon frame. They have a weird bolt the holds the post
anyone Know what the recommended torque on that should
be. I may just have to E-mail LOOK for that one
Thanks
crewman
When tightening the plug for the carbon fork to take up the slack in the bearing, whats the torque spec on the plug? I thought it was like 7nm or something.
Also I have a 3T forgie stem with a single bolt clamp. Anyone hazard a guess what the spec on that should be?
I have also added a new LOOK Ergo Post to my LOOK
Carbon frame. They have a weird bolt the holds the post
anyone Know what the recommended torque on that should
be. I may just have to E-mail LOOK for that one
Thanks
crewman