Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.poopncow
09-18-06, 08:51 PM
Have an old pair of 80's MA2's laced 4X to Miche low flange hubs - 36*
I'm getting a rattling buzz from the front and some creaking from the rear.
I've check that the tension is relatively even.
In back, when hammering, there is this noise from the rear wheel. sounds like if I grabbed a pair of crossing spokes and rubbed them together
In front, over rougher ground, there is this buzzing rattle that sounds like there are beads inside the handle bar. The headset is tight, none of the components are shaking loose, just this tinny buzz. Any ideas folks?
I'm getting a rattling buzz from the front and some creaking from the rear.
I've check that the tension is relatively even.
In back, when hammering, there is this noise from the rear wheel. sounds like if I grabbed a pair of crossing spokes and rubbed them together
In front, over rougher ground, there is this buzzing rattle that sounds like there are beads inside the handle bar. The headset is tight, none of the components are shaking loose, just this tinny buzz. Any ideas folks?