Mountain Biking - Atomlab G.I. 12mm through axle hub???
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
09-24-06, 08:47 PM
Ok so i'm posting this question for a friend. He recently got a 03 Giant DH team off ebay and the frame requires a 12mm through axle. Ok, so he had Ride-This build up a wheel for him using a Atomlab G.I. rear hub. The hub came with a 10mm bolt on axle but the site says it can convert into a 12mm through axle. So he got the wheel and he says there is no possible way this hub can convert. I have not seen the hub but i'm guessing you have to remove the 10mm axle, but he can't figure out how to do that!!
Heres a picture and the site where he got it from
09-26-06, 09:54 PM
Ok so I think I figured it out because he got 12mm adapters for the hub but those adapters only go onto the 10mm axle to make it larger. So its not a through axle what so ever, there for they lie and it will not work.
Are there even such things a 12mm dropouts, cuz Ive never herd of em.
09-27-06, 10:29 AM
There are a few bikes with 12mm dropouts. I would suggest you give Atomic Laboritories a call. They, in my experiance, have always been very helpfull.
Here is their site AtomLab2006 (http://www.atomlab.com/)
I would say drop them an email first, they usually respond in a day or two. If not then give them a call.
Powered by vBulletin® Version 4.1.12 Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.