WARGAMES
09-26-06, 05:26 PM
whats the best way for removing the decal off of a frame that is not a sticker
Singlespeed & Fixed Gear - removing logo's and decals
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.View Full Version : removing logo's and decals
hyperRevue
09-26-06, 05:37 PM
About what bike are we talking?
It depends. If they're under clearcoat, you need to zip strip it or something to get the decal off - but that will ruin the paint too unless we're talking about a chrome Pista.
It depends. If they're under clearcoat, you need to zip strip it or something to get the decal off - but that will ruin the paint too unless we're talking about a chrome Pista.
sers
09-26-06, 06:31 PM
you can sometimes get away with sanding down the logo, repainting and clearcoating, and then using a clearcoat polish to even things out - depending on the color of your frame
WARGAMES
09-26-06, 06:33 PM
black moth frame with a big ****ing logo
sers
09-26-06, 06:44 PM
then sure. sand it down, clean it, and then hit it with a single coat of primer, and 2 coats of laquer, and then 2 coats of clearcoat. let it overlap the painted edges a bit. let it cure, and then use clearcoat polish, which is a superfine abrasive, to even it up. bam, it's like it was never there.