Mountain Biking - Hone components?

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.




View Full Version : Hone components?


ed
10-01-06, 12:05 PM
I think I made a mistake. I got a killer deal on a set of Saint cranks, but I really don't freeride. I have a 5" dually, so I think I'm going to go with some lighter cranks.

What do you think of Hone cranks? I'm either going to go Hone or LX. I really wish I could get XT or RF Dues, but I don't believe the extra $100-$120 is worth the 70g weight loss when I can spend that money and save almost a 1/2 lb on pedals.

The Hones are 230g lighter than Saints. That's a half pound. That mixed with lighter tires and tubes will lose me about 1.5 lbs. I could save another 1/4 to 1/2 in pedals and another 1/4 to 1/2 in saddle. I thought about selling my hardtail and using the money to get some XT cranks and Crossmax Enduro's (which would save me 1.3lbs of rotating weight BTW) but I just can't bring myself to get rid of the HT.

When I first built my dually with LX HTII cranks, Arami saddle, and lighter tubes, I weighed it at 30.5 lbs. I switched to Saint cranks, DH tubes, and Bontrager Race Luxe saddle and now it weighs 32.65 lbs.


Anyway's, all babeling aside...whatdaya think of Hone cranks? I know they're a little tougher than LX, but really don't weigh more @ 928g.


FreeRidin'
10-01-06, 03:25 PM
Sounds like your turning in to weight weenie!:mad:
How much you want for your saints if your selling them?

ed
10-01-06, 05:22 PM
Yeah, I've always been alittle weight concious when I can afford it. I figure that if most of what I do is agressive XC, why settle for 32lbs when I can get the bike down to below 30 (a good % is in rotating weight) w/o comprimising my bikes ability to handle my style of riding.

I mean seriously...I've never dropped anything taller than 5' to flat. I think that was with my LX cranks to boot.

Regarding my Saints...I dunno. I was thinking about trying to get in the neighborhood of $115, but I also thought about keeping them to build a FR hardtail. I would freeride if I had proper equipment. I just don't wanna huck big stuff on my Dakar XLT frame with a rear shock and fork that don't even have compression adjustments. I would consider it if I had a Vanilla RLC fork with DHX shock so I don't bottom out. As it stands, to keep from bottoming out...I need so much preload that casual riding and agressive XC is uncomfortable.


Twins Fan
10-01-06, 07:48 PM
I have the Hone crankset, it feels pretty dang solid to me. I've only been riding it for about a week total but I feel none of the wierd flex my other crankset gave me. We'll see how she holds up in the long run but at the moment I think I made a good buy. If Jensonusa.com still has the Hone's on sale I'd say go for it. Oh, what cassette are you running? I just lost a little over half a pound off my bike by switching to a better cassette and foam grips.

free_pizza
10-01-06, 09:25 PM
I mean seriously...I've never dropped anything taller than 5' to flat. I think that was with my LX cranks to boot.
.
5 feet to flat is a pretty big drop!

ed
10-01-06, 09:27 PM
I just lost a little over half a pound off my bike by switching to a better cassette and foam grips.

I know I'm a bit of a weight weenie, but I'm not going to go foam. I love my Lizard Logo Lock On grips and I don't ever intend to change those.

As far as cassette goes...I'm pretty much full-on XT. (Hubs, cassette, rear der., front der) I can't really save any significant weight there.

I'll probably start looking for Hone cranx, Kenda 2.35" smallblock 8's, lighter tubes and pedals, and a WTB Rocket V saddle. That should put me in the 29lb range or possibly even less.

I don't want to go all "weight weenie" and negate the toughness of the bike. It is a really tough trail bike, it's just not made for freeriding. If I'm gonna freeride, I'm gonna build a dedicated rig. I just do more small jumps and drops mixed with agressive trail riding on this bike, so why make it weigh more than it really needs to? Heck, I was doing 4 foot to flat with LX cranks...that's plenty for a trail bike. I guess basically where I'm at is that Saint cranks are awesome, but I'm never going to bend or break Hones doing what my bike is designed to do so I may as well lose some weight.

So if I can't get 115 for my Saints, I'll just keep them for a future project.

MattP.
10-01-06, 09:35 PM
5 feet to flat is a pretty big drop!

That's what I was thinking. Was it measured in PinkBike feet?

free_pizza
10-01-06, 09:36 PM
Was it measured in PinkBike feet?
:roflmao:

ed
10-01-06, 10:05 PM
5' to flat really isn't big in the world of freeride, is it? Actually, the 5' that I did was on a Cannondale Super-V 900 Comp with a headshock DD60 (that's only 60mm of fork travel). I probably haven't even done 5' these days. I don't really have any terrain like that around here unless I go downtown and jump off stairs and land on the flat. I did do a 4' staircase the other day w/o landing on the stairs...I just landed on the flat.

I know that 5' to tranny is really insignificant as far as impressive FR stuff goes.


Either way, I don't think I need a crankset that could beat the crap outta my frame if need be, hehe. I'd rather everything be more balanced.

FreeRidin'
10-01-06, 10:48 PM
I agree with getting some Hones over lx. 5' to flat is pretty harsh on a bike and if you were to do it multiple times your LX would probably brake. Hell, i've seen a bunch of people DHing with Hones so they are def. strong. It is better to know that your riding a safe and strong bike than to shave a few grams.

My friend was riding some crappy truvativ square taper cranks and did about a 5' to flat...he snapped the BB spindle and had to get 7 stitches down his leg, this was a long long time ago. Just thought I should tell you this.:D

Blazinall91
10-02-06, 12:13 AM
Chelboed check your private message

crazeed
10-02-06, 01:19 AM
why exactly would you do a drop to flat, that isnt at all cool, unless you are ryan leech. when you land you can tell its so bad for the bike/wheels, like yea i loooove flat spots!!!

ed
10-02-06, 06:19 AM
If flat's what ya got, flat's what you do...and like I previously stated, I don't intend to do anymore drops unless I have a good tranny, or unless I build a FR bike. I will just stick to agressive XC.

I agree, it's hard on it and I don't do it anymore. I'm working on building a tech loop at our trails that may have some drops to tranny. Should be fun.

BTW, I AM Ryan Leech...hehehehe.

Minesbroken
10-02-06, 07:35 AM
I never heard of Hone, but I am learning new stuff everyday thanks to all the bashing I get lol. I have LX and I like them, If you think the hone are stronger then I would go with that because If I get more than 3 feet of air over a jump I think hard about my cranks breaking. but then I am 190 pounds also. Havent broken yet ;)