Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.tcar5
10-10-06, 02:27 PM
I have two LCD PC monitors with two different problems.
#1 18" with classic inverter board failure = power stays on, no picture except for a short 3 second burst when the power is first turned on.
#2 17" NEC 1700m shows clear picture for three seconds then powers off and powers back on, shows picture and powers off and on.....until I unplug it. That is my question, What is it's problem. I read some posts about inverter board problems but they always mention the power staying on full time. I am not a circut tester and cannot find any obvious signs of a fuse issue. Any ideas from the group?
I may just junk it, but if it can be repaired for $50 with a new inverter board its money saved.....
#1 18" with classic inverter board failure = power stays on, no picture except for a short 3 second burst when the power is first turned on.
#2 17" NEC 1700m shows clear picture for three seconds then powers off and powers back on, shows picture and powers off and on.....until I unplug it. That is my question, What is it's problem. I read some posts about inverter board problems but they always mention the power staying on full time. I am not a circut tester and cannot find any obvious signs of a fuse issue. Any ideas from the group?
I may just junk it, but if it can be repaired for $50 with a new inverter board its money saved.....