General Cycling Discussion - Helmet question

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.




View Full Version : Helmet question


Crazy Cyclist
03-24-03, 05:01 PM
I hope someone can answer a question I have. I tried on my helmet today, so when the riding season starts I will be ready, but what happened was, I accidently pulled the strap which makes the helmet tighter on the sides, and it came out of it's holder, where it meets the buckle, I tried to figure out how to put it back together, but the ends are frayed so I cut them a little, to to try and get them in the small openings, and now they are too short, and I can't buckle the helmet up, what I was wondering is could a bike shop repair this for me, I don't want to have to buy another helmet if I don't have to, I like the fit of this one, but these straps are starting to make me mad. Any suggestions:mad:


D*Alex
03-24-03, 05:51 PM
cry?

Michel Gagnon
03-24-03, 05:53 PM
I'm not sure a bike shop can legally offer any repairs on it. However, here are a few suggestions:

1. Visit a sporting good store or a (car) body shop. The straps are similar to those used to tighten loads on some racks, and similar to safety belt straps, except narrower.

2. Some fabrics stores might sell that material. But I don't know the exact strenght required (ASTM standard?) nor do I know how to test the stuff you might get at a fabrics store.

2. Buy a really cheap helmet. Remove its straps and reuse them in your helmet. Total investment: 25 $ or less

Regards,


Crazy Cyclist
03-24-03, 05:54 PM
alex, that's going to be me soon, if I don't get this problem fixed.:(

Chris L
03-24-03, 06:54 PM
If I had a situation like this, it's probable my LBS would fix it without complaining too much. Although I don't think any problems I've ever had have been self-inflicted.

shokhead
03-24-03, 07:07 PM
Everybody is selling last years models cheap right now.

Raiyn
03-25-03, 12:26 AM
Try specialized.com and check the specials

Raiyn
03-25-03, 12:27 AM
Ripping me off eh? D*Alex?? LOL

ParamountScapin
03-25-03, 04:23 AM
I bought two of last year's color Giro Eclipse helmets (new in this year's colors are $100+) for $30, each. Don't match my bike, but for $70 I'll buy coordinated socks. Probably less expensive than getting new straps for your old helmet.

bigbadsteve
03-25-03, 05:01 AM
Manufacturers recommend a new helmet every five years or so, to take advantage of design improvements (and to sell more helmets no doubt).

I know mine take the odd knock so periodical replacement is good for safety.

If you get a new one, make sure the strap goes directly through holes in the foam, and not thrrough a crappy plastic strip that will probably break in a few months.

Chris L
03-25-03, 03:12 PM
Originally posted by bigbadsteve
Manufacturers recommend a new helmet every five years or so, to take advantage of design improvements (and to sell more helmets no doubt).

I know mine take the odd knock so periodical replacement is good for safety.

So does mine. It's called "magpie season". :eek:

closetbiker
03-26-03, 08:24 PM
Originally posted by bigbadsteve
Manufacturers recommend a new helmet every five years or so, to take advantage of design improvements (and to sell more helmets no doubt).

from: http://www.helmets.org/replace.htm

Most manufacturers now recommend that helmets be replaced after five years, but some of that may be just marketing. (Bell now recommends every three years, which seems to us too short. They base it partially on updating your helmet technology, but they have not been improving their helmets that much over three year periods, and we consider some of their more recent helmets to be a step backwards, so we would take that with a grain of salt.) Deterioration depends on usage, care, and abuse....
Somebody is spreading rumors that sweat and Ultraviolet exposure will cause your helmet to degrade. Sweat will not do that. The standards do not permit you to make a helmet that degrades from sweat, and the EPS, EPP or EPU foam is remarkably unaffected by salt water. Your helmet will get a terminal case of grunge before it dies of sweat. UV can affect the strength of the shell material, though. Manufacturers put UV inhibitors in the plastic for their shells that control UV degradation. If your helmet is fading, maybe the UV inhibitors are failing, so you might consider replacing it. Chances are it has seen an awful lot of sun to have that happen....
In sum, we don't find the case for replacing a helmet that meets the ASTM or Snell standards that compelling if the helmet is still in good shape and fits you well.

Chris L
03-26-03, 08:55 PM
Originally posted by closetbiker
Deterioration depends on usage, care, and abuse....

This is a valid point. Sometimes it's difficult to put a set timeframe on these things. Generally, if you have a crash and damage your helmet, it's done it's job and should be replaced immediately, regardless of the length of time you've had it.

ohsfan
03-26-03, 08:56 PM
Originally posted by ParamountScapin
I bought two of last year's color Giro Eclipse helmets (new in this year's colors are $100+) for $30, each. Don't match my bike, but for $70 I'll buy coordinated socks. Probably less expensive than getting new straps for your old helmet.

Man, and I thought I got a good deal when I bought it for $50!!:mad:

Nice find! :beer: