Bicycle Mechanics - help installing seat post - carbon to carbon

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.



PDA
chunt
10-11-06, 08:21 PM
I had to buy a new seat post. The new FSA seat post is about 4" longer than the OEM Bontrager. I'm having a very difficult time pushing the new seat post into the down tube - very, very tight fit. Yes, the seat post ring is completely loose. I don't want to try to cut the carbon. Should I lube it with WD40 or bar soap? Other advice? Thanks.

chunt
10-11-06, 09:14 PM
Nevermind...got it...finally.
Al1943
10-12-06, 02:14 PM
Never lube a carbon fiber seat post or seat tube.
When I built up my C50 is was necessary use some sand paper to smooth and slightly enlarge the inside of the seat tube. I used fine sandpaper.

Al