Zen Existence
10-11-06, 10:57 PM
Dumb question, because, well, I'm full of them, but I have a Deep V from IRO for my Raleigh whose spacing is too wide for my Fuji. Can I just get the axle replaced? Never dealt with this issue before.
Singlespeed & Fixed Gear - Axle Question
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.View Full Version : Axle Question
Learn_not2burn
10-12-06, 07:52 AM
if there are spacers then just take the spacers out. We had athread a while ago that suggested that all IRO hubs are 120mm, and that Tony just adds spacers to them to get the 130 and 135mm sizes, which is actually very good.
explody pup
10-12-06, 08:00 AM
Ayup. My IRO hub was spaced to 126mm when I bought it. Got a new frame spaced at 120mm and easily removed the two 3mm spacers.