Bicycle Mechanics - Help with the chainline of this bicycle.
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
This is a very unique bicycle, I was hoping to replicate. I contacted the owner and was given permission. However, I need help figuring out how this chainline is done. If someone could help me draw this out it would be appreciated.
11-06-06, 09:14 AM
looks like a mess--an elect. motor hub (off ebay) would be a lot easer.
I think most of the derailers he used are for chain tensioning.Seem(to me)he ran his front sprocket to a cluster-small cog and a second chain second gog to the rear hub.this would shift as normal. the motor runs to a free wheel(he used a 5speed but a single would work)He most likely used BB cups on the jacksaft to add the freewheels.A lot of his chains and derailers could be eleminated by using an old schwinn that came with the freewheel in the BB.---sam
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.