Chuvak
04-05-03, 06:17 PM
Just got a new headset, C2 cane creek. This is my first threadless and I'm confused on which parts I should apply lube to.
Bicycle Mechanics - 2 lube or not 2 lube?
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.View Full Version : 2 lube or not 2 lube?
D*Alex
04-05-03, 10:22 PM
Umm.....the bearings??? Most likely sealed, though, so don't worry.
Chuvak
04-07-03, 09:14 PM
does anybody else know?
WorldIRC
04-07-03, 09:38 PM
You'll have a hard time lubing the C2. The bearings are all sealed.
a2psyklnut
04-07-03, 11:36 PM
Agreed, no luby on the spiny thingies!
L8R
Seriously, you'll want to put a thin layer on the steerer tube below the bearing race, this will prevent galvanic reaction and will keep the race from fusing to the steerer tube. That's about the only place!
Do you have a bearing press? I made one out of a piece of all thread and some big, big washers and a pair of big nuts (for the all thread-not mine!).
L8R
L8R
Seriously, you'll want to put a thin layer on the steerer tube below the bearing race, this will prevent galvanic reaction and will keep the race from fusing to the steerer tube. That's about the only place!
Do you have a bearing press? I made one out of a piece of all thread and some big, big washers and a pair of big nuts (for the all thread-not mine!).
L8R
Inoplanetyanin
04-20-03, 06:00 PM
:lol: :thumbup:
Chuvak
04-20-03, 06:03 PM
Yeah I have to agree, something is definitely funny here………:rolleyes: