Bicycle Mechanics - Component Replacement
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
11-28-06, 11:57 AM
Does anyone of a good how to book regarding component replacement, I just bought a used frame and fork and want to build the bike myself. Any suggestions would be appreciated.
This (http://www.amazon.com/Bicycling-Magazines-Complete-Maintenance-Mountain/dp/1579540090) book by Bicycling magazine is not bad at all, I have an older version.
Zinn (http://www.amazon.com/Zinn-Art-Road-Bike-Maintenance/dp/1931382697/sr=1-2/qid=1164737360/ref=pd_bbs_sr_2/002-8625625-0208046?ie=UTF8&s=books) is also very good, from what I hear, though I do not own a copy.
11-28-06, 12:13 PM
Zinn and the Art of Road Bike Maintenance is a very good resource - you can't beat the exploded drawings and he covers most types of maintenance, installation and repair for several eras. Park Tool's Big Blue Book of Bicycle Repair is also quite good.
And, of course, there's Sheldon Brown's website and this forum if you need further guidance. It wouldn't hurt to post some information about the fork and frame you bought - there are many people here who will help you get started. If it's an older bike - pre-1990 - try the Classic & Vintage forum, they have lots of experience and love sharing it.
I think, also, that it would be worthwhile going to a thrift store, buying a crappy old bike for 15$, taking it apart, cleaning/repacking etc., and putting it back together again, so you know what you're doing when you 're ready to build up a bike you care about.
11-28-06, 01:53 PM
it is a specialized stumpjumper with a manitou fork. Thanks for the advice
11-29-06, 06:04 AM
I set up my laptop on my workbench and have all the reference tools I need right at my fingertips.
11-29-06, 06:09 AM
All 4 of these sources are very good. The articles by Sheldon Brown also contain a lot of historical and "why is it done that way" information. Try to figure out what equipment your bike has, stem size, hub length over the lock nuts etc. Then you will be able to look for proper replacements or upgrades.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.