Classic & Vintage - Chain for Bendix coaster hub
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
12-27-06, 07:02 PM
Hey all. I'm building a single speed roadster for my wife and I have an old Bendix mexico 86 hub for it. I also have a bendix 19t cog. I went to put the chain on and it would not engage the cog teeth. I measured the teeth with my caliper and they were 3mm @ their widest. This makes me think it would take a 1/2 inch track chain. Is this right for a coaster hub? Any ideas?
12-27-06, 07:28 PM
Should be 1/2" x 1/8" . Available evrywhere even at xmart.
12-28-06, 12:08 AM
Thanks. The more I thought about it, the more I realized I jumped the gun w/ the question. Old bmx used coaster hubs, and older bmx used bmx chains. 1/2 x 1/8. Duh. Thanks.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.