Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.dogsridewith
01-19-07, 06:34 AM
Maybe someone here would be kind enough to offer suggestions for my search. The apparent original bolt, of the four required, is a 5/16 thread shoulder bolt with a 7/16 diameter shoulder about 5/32 long. Bolt length, excluding head, per convention, is about .570 inch. Shallow hex head is .630 across flats.
I suspect similar bolts used on other springers. I would use any alternative fastener arrangement that provides similar function. Hopefully won't have to cut short bushings out of tube to fit over 5/16 bolts.
Thanks.
I suspect similar bolts used on other springers. I would use any alternative fastener arrangement that provides similar function. Hopefully won't have to cut short bushings out of tube to fit over 5/16 bolts.
Thanks.