Singlespeed & Fixed Gear - Removal of Sugino print on RD
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
I believe I read that you can take the "Sugino" name of the RD cranks with acetone. Just wanted to double check. Anyone done this? Or, use anything else to remove the name?
Acetone sounds right to me - the logo is a silkscreen right? I heard about it used to get the logo off bulletproof cranks.
01-19-07, 10:33 AM
I used acetone to remove the writing on Bulletproof cranks with no problem.
The acetone took the name right off.
Sweet, thanks for the wrap-up aal. I am going to try using acetone to debadge my Tektro R200 aero levers.
01-21-07, 09:13 PM
the logo on the RD's rub off in less than a month, so save your money and have patience.
Mander, I used acetone to debadge my Tekrtro brake also.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.