Bicycle Mechanics - Look 4x4 overhaul
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
My pedals are really looking forward to be overhauled very soon, but can't figure out how to get this sh*t open, manage to remove top cap and axle lock nut but then comes a wall, should I just be able to get the axle out by smashimg it's outer end? Well, done this quite much with no success. There should be one cartridge bearing and one needle bearing in there. Lousy instructions don't tell anything about overhauling, apart of saying it should be done sometimes.
Hope someone is familiar with this, thanks
02-08-07, 01:08 PM
I'm not sure that most Look pedals are designed to be serviceable. Which model are you working with, from what era?
Look 4x4 2005, should be possible to overhaul
I don't know that the 4x4 are any different at all from your standard Eggbeater. Check with Crank Brothers.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.