Bicycle Mechanics - Campag 9 & 10 speed chains

Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.



PDA

View Full Version : Campag 9 & 10 speed chains

Resident
05-08-03, 07:40 PM
Here's a couple of questions:

1) The 9-speed chain doesn't have a 'special' pin to connect it. However, it does require a $220 tool to install it. (I imagine the tool peens the pin). Can this chain be connected without the tool? How?

2) The 10-speed chain has a special hollow pin with a drive shaft. Is this shaft reuseable?

Is it better to buy a Wipperman with a Sachs-like powerlink?

Kev
05-08-03, 07:42 PM
I know the 10sp requires a special tool if you use their permalink, not sure about the 9sp. I would just get the wipperman chain or the powerlink makes life alot easier.
TandemGeek
05-08-03, 10:06 PM
Actually, if you're using Campy or Shimano chains your best bet for a re-useable link in the Forster (formerly Craig) SuperLink. In general, the SuperLink III (Green Card) works with Campy 10spd; SuperLink II (Pink Card) works with 9 speed, SuperLink I (Yellow Card) works with 8/7 speed. They are available at Branford bike for $7.95/ea (ouch). http://www.branfordbike.com/chains/chains4.html#item5

But, unless you're buying something else from Branford, save $2 or $3 by buying them from Licton's: http://www.lickbike.com/i0338150.htm