Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.bluehorizons
02-11-07, 06:47 AM
Sorry for the cross-post with the road forum.
I want to extend my wired flight deck to the back wheel, so i picked up a second wiring harness off ebay and was about to solder everything up this am to extend the pickup to the rear wheel. But when I snipped off the wires, I noticed that there are actually two wires connecting the magnet pickup to the wiring harness. Do i have to be careful to make sure to connect the wires to the right pair, or is it a simple loop circuit in which case it wouldn't matter?
Thanks in advance.
Matt
I want to extend my wired flight deck to the back wheel, so i picked up a second wiring harness off ebay and was about to solder everything up this am to extend the pickup to the rear wheel. But when I snipped off the wires, I noticed that there are actually two wires connecting the magnet pickup to the wiring harness. Do i have to be careful to make sure to connect the wires to the right pair, or is it a simple loop circuit in which case it wouldn't matter?
Thanks in advance.
Matt