Singlespeed & Fixed Gear - Micro adjust seatpost tool?
Bikeforums.net is a forum about nothing but bikes. Our community can help you find information about hard-to-find and localized information like bicycle tours, specialties like where in your area to have your recumbent bike serviced, or what are the best bicycle tires and seats for the activities you use your bike for.
02-16-07, 07:55 AM
i have one of the old campy style micr adjusting seatpost and its difficult to get the bolts tight because they are located on top instead of the bottom of the post (pict having the allen key hole on modern seatpost but on top instead). i use my fingers to tighten but can't get it fully tight. can someone give me a link on how to tighten it or is there a special tool needed?
02-16-07, 08:44 AM
sounds like you've got the same seatpost i have. i used a 10mm box wrench. three bucks at a hardware store.
02-16-07, 08:50 AM
If I go to MT , i will show you.
The easiest way to get at it is with a 10mm offset ratcheting box wrench. I picked one up from Snap-On for like $12 with free shipping. This is the wrench in question -- Wrench, Metric, Ratcheting Box, 25° Offset, Standard Length, 9-10 mm, 12-Point (http://buy1.snapon.com/catalog/item.asp?P65=&tool=hand&item_ID=4950&group_ID=541&store=snapon-store&dir=catalog)
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.